Department of Textile Engineering
Dr. Md. Mahbubul Haque  Professor & Head
Name :
Dr. Md. Mahbubul Haque
Employee ID
710000463
Designation
Professor & Head  
Department
Department of Textile Engineering
Faculty
Faculty of Engineering
Personal Webpage
http://faculty.daffodilvarsity.edu.bd/profile/te/mahbubul.html
E-mail
headte@daffodilvarsity.edu.bd, drhaque@alumni.manchester.ac.uk
Phone
9138234-5, 9136694, 9116774 extension-162
Cell-Phone
01847140064

B.Sc. Text. Tech.(1st class 1st) M.Sc. Tech (Research) & Ph.D. (Manchester, U.K)

(i) Several training including two in the TIDC(Stood first among the group), Savar, Dhaka,
(ii) Experience 26 years

Fabric Manufacturing, Textile Testing and Quality Control, Specialized and Technical Textiles, Textile Effluent treatment etc.

Journals:

  1. Haque, M. M., "Effect of warp and weft tension on the properties of fabrics woven on a rapier  loom" Journal of Institute of Textile Engineers and Technologists Bangladesh, 1997.
  2. Haque, M M, "Twist testers, Measuring techniques and some anomalies in estimating twist loss in air-jet weaving" Journal of ITET 1999.
  3. Haque, M M, “Crimp measurement aspects of accuracy" (Co-author), Journal of ITET 2000.
  4. Haque, M M,"Twist liveliness- the causes of many troubles in processing" Inaugural Brochure of the Annual convention of the ITET 2002.
  5. Haque, M M, Synthetic Fibres: The Fibres for the Future; Published in Texture of July 2003 issue on eve of a farewell reception ceremony Brochure of Ahsanullah University of Science and Technology.
  6. Haque, M M,  “Quality research is essential for the development of textile and garment sector” a Bengali article was published in the 1st issue of Monthly BastraJagat- A publication of the Department of Textile, Ministry Of Textile.
  7. Haque, M M, , “Quality research is essential for the development of textile and garment sector” a Bengali article was published in the 1st issue of Monthly BastraJagat- A publication of the Department of Textile, Ministry Of Textile.
  8. Haque, M M, “Importance of cover factor” Published in a publication of the ITET on the eve of annual general meeting held in January 2006.
  9. Haque, M M, “Problems and prospects of weaving sector” Published in TEXSTYLE in August 2006 on eve of a farewell reception ceremony Souvenir of the Dept. Of Textile Technology, Ahsanullah University of Science and Technology.
  10. Haque, M M, “Minimization of toxicity and volume of textile wastewater” Published in “Textile Bnagladesh 2006”An annual textile publication, December 2006.
  11. Haque, M M, “Sewing needle and sewing threads” Textiles & Clothing,  Bangladesh-Jan,  Feb & March Issue of 2007.
  12. Haque, M M, “Pollutants of textile wastewater and their effects on environment” Published in the proceedings of MED, IEB.
  13. Haque, M M, “Methods of Textile Pollutants Minimization” Bangladesh Centre For Advanced Studies; News letterVol 17, No 1 December 2006. www.bcas.net
  14. Haque, M M, “R & D Facility: An essential Homework For Export Oriented Textiles And Garment Sector Of Bangladesh” Tex Vision- was published to bid farewell to the out going students of 7th batch of the Dept. Of Textile Technology, Ahsanullah University of Science and Technology. March 2007.
  15. Haque, M M, “Problems of the exported oriented woven sector” Published in the 12th Mechanical Engineers Conference organized by (MED) IEB held at IEB new Bhaban on February 8-9, 2008.
  16. Haque, M M, “Treatment of Textile Wastewater in the Bangladesh” published as cover story in “Cotton Bangladesh” April 2008, Vol-8, Issue-2.
  17. Haque, M M, “Export oriented Textiles and RMG Sector needs to be restructured” Published in the Dhaka post, November 21, 2008 & December 2, 2009 Issues.
  18. Haque, M M, “Effect of Weft Parameters on Weaving Performance & Fabric Properties” Journal of Daffodil International University, Vol-4, Issue-2, July 2009.
  19. Haque, M M, “Development handloom sector”, Published as Top story in the Textile Today (Vol-2 Issue-4) a leading textile magazine of Bangladesh.
  20. Haque, M M, “Some Challenges and tasks lies ahead for the newly installed Bangladesh Textile University” Published as in January-February editorial(Vol-4 Issue-1) a leading textile magazine of Bangladesh.
  21. Haque, M M, “Technical Textiles may be the Gateway to Boundless Opportunities for our textiles Sector” Published as cover story in the Cotton Bangladesh, April 2012.
  22. Haque, M M, “Development of Technical in Bangladesh” Published as cover story in the Cotton Bangladesh, July 2012.
  23. Haque, M M, “Restructuring Textile Vocational Education in Bangladesh”Published as cover story in the Cotton Bangladesh, October 2012.
  24. Haque, M M, “Development of our local textile machineries” Published on 7th May 2013 in “Projukti” a special publication of IEB, Dhaka Centre and it was published on the Eve of Engineers day 2013. It was Publish to mark the 65th Birth Day of IEB.
  25. Haque, M.M, “Pilling propensity of various types of knit fabrics”, Journal of Textile Engineering, Textile Engineering Division, Institution of Engineers Bangladesh, Vol.1, Issue-1, December 2013.
  26. Haque, M.M, “Some suggestions to develop Export Oriented Textiles and RMG sector” Published in the 55th Convention Souvenir of IEB, May 2014.
  27. Haque, M.M,“Effect of Knitting parameters and Stitch type on the Grey GSM of circular weft knitted fabrics”, BUTEX Journal of Textile Science and Engineering, Vol.1 Issue 1, June 2014.
  28. Haque, M.M & Maruf, NH, “Evaluation of Processing Performance and Properties of 100% Cotton-Polyester Blended Ring Yarns” Journal of Textile Science & Engineering; Haque and Maruf, J Textile Sci Eng 2016, 6:2, ttp://dx.doi.org/10.4172/2165-8064.1000244
  29. Haque, MM, “Development of Technical Textiles in Bangladesh: What needs to be done?” KINKLE: A magazine by BUTEX Science Club; Page-26

As Co-author

  1. Rahman, M.M and Haque, M. M., “Effect of Sewing Thread Count and Stitch per Inch on Sewing Quality”, Proceedings of the 13th Annual Paper Meet, IEB, Dhaka, Bangladesh, Held on 25th September, 2010.
  2. Islam, Md. Azharul and Haque, M M, “Effect of knitting parameter and wet processing stages on properties of single jersey knitted fabrics. Proceedings of the 13th Annual Paper Meet, IEB, Dhaka, Bangladesh. Held on 25th September, 2010.
  3. Rahman, MdZahidur and Haque, M M, Effect of finishing on the GSM of denim fabric”. Proceedings of the 13th Annual Paper Meet, IEB, Dhaka, Bangladesh. Held on 25th September, 2010.
  4. Amin, MdRuhul and Haque, M M, “Effect of weave structure on weaving performance and fabric properties”. Proceedings of the 13th Annual Paper Meet, IEB, Dhaka, Bangladesh, Held on 25th September, 2010.
  5. Mazumder ,Sumon; Uddin, Zulhash; Haque, Md.Mahbubul, “Assessment of Pilling Resistance and Weight Loss After Bio-polishing of Cotton Knit Fabrics with”. Textile Trend, December, 2010, Published from India.

Editorship

  1. Editor, Journal of Textile Engineering, Textile Engineering Division, IEB
  2. Member, Editorial Committee, International Editorial Team, European Scientific Journal (ESJ)

Books:

  1. Rahman, M.M and Haque, M. M., “Effect of Sewing Thread Count and Stitch per Inch on Sewing Quality”, Published by VDM Publisher based in Germany. http://www.amazon.com/Effect-sewing-thread-stitch- quality/dp/3639318935/ref=sr_1_2?ie=UTF8&s=books&qid=1292385057&sr=1-2
  2. Developed several (part or whole) original Textile text Materials including production of Denim & Woven label.

Conference Papers:

  1. Untwisting of weft yarns on air jet loom, March, Dept. Of Textiles, University of Manchester Institute of Science and Technology, U.K. (March-1996). 
  2. "Pollutants of textile wastewater and their effects on environment". Presented at Mechanical Engineers Conference and 11th annual paper meet of Mechanical Engineering division (MED) of IEB held at IEB new Bhaban on 26th December 2006.
  3. "Problems of the exported oriented woven sector " Presented at Mechanical Engineers Conference and 12th annual paper meet of Mechanical Engineering division (MED) of IEB held at IEB new Bhaban on February 8-9, 2008.
  4. Session chairman of the 12th & 13th Mechanical Engineers Conference and 12th & 13th annual paper meet of Mechanical Engineering division (MED) of IEB held at IEB new Bhaban on February 8-9, 2008 & 25th September, 2010 respectively.
  5. "Steps to improve the Export Oriented Textile and RMG sector of Bangladesh." in the dept. of Textile Technology, AUST.
  6. “Development of Our Textile Sector: What needs to be done?” Presented as Keynote speaker in IEB seminar Hall, IEB on the eve of 65th Engineers day held on the 17th May 2013. 

    As Co-Presenter

    7. Rahman, M.M and Haque, M. M., “Effect of Sewing Thread Count and Stitch per Inch on Sewing Quality”, Proceedings of the 13th Annual Paper Meet, IEB, Dhaka, Bangladesh, Held on 25th September, 2010.

    8. Islam, Md. Azharul and Haque, M M, “Effect of knitting parameter and wet processing stages on properties of single jersey knitted fabrics. Proceedings of the 13th Annual Paper Meet, IEB, Dhaka, Bangladesh. Held on 25th September, 2010

    9. Rahman, Md Zahidur and Haque, M M, Effect of finishing on the GSM of denim fabric”. Proceedings of the 13th Annual Paper Meet, IEB, Dhaka, Bangladesh. Held on 25th September, 2010.

    10. Amin, Md Ruhul and Haque, M M, “Effect of weave structure on weaving performance and fabric properties”. Proceedings of the 13th Annual Paper Meet, IEB, Dhaka, Bangladesh, Held on 25th September, 2010.

    11. Shadid , S. Abdullah, Rahman, Mohammad Faizur and Haque, M. M, “Study on consumption of warp yarn in producing woven fabrics of various constructions”, Proceedings of the 13th Annual Paper Meet, IEB, Dhaka, Bangladesh, Held on 25th September, 2011.
  1. Area of Interest: Textile production methods, Fabric manufacturing in general, Handlooms, textile costing, textile economics, sewing performance etc.
  2. Problems of export oriented weaving sector of Bangladesh
  3. Supervised 30 M.Sc. theses individually and 17 theses jointly. More than 25 theses are in progress. 
SL. ID Name Supervision
Self/jointly
Thesis Title Passing Semester
1 092-23-110 Md. Mahfuzur Rahman Self  Effect of Sewing Thread Count and Stitch per Inch on Sewing Quality Summer 2010
2 092-32-101 Syed Shafqatullah Self Merchandising practices in the export-oriented RMG Summer 2011
3 101-32-128 Md. Helal Uddin Self Study on different garments washing method in Bangladesh Spring 2012
4 101-32-133 Md. Ismail Molla Self Waste Control in Ring Spinning Spring 2012
5 101-32-142 Shib Shankar Chakraborty Self  Problems & prospects of Hand Loom Weaving  Process Spring 2012
6 093-32-126 Shuvra Goswami Self Comparative Study between Bangladesh Textile export & other competitors in Subcontinent to the USA Market Fall 2012
7 093-32-122 Sharfaraz Khan Self Effect of knit structure & knit parameters on properties of knit fabric Fall 2012
8     Self    
9 112-32-156 Selim Reza Self Effect of Processing parameters on the GSM of WEFT knitted Fabric Spring 2013
10 121-32-173 Kazi Md. Elias Self Study of pilling propensity of various types of knit fabrics Fall 2013
11 092-32-119 Mohammad Faizur Rahman Self An Investigation on Ethnic Fashion of BD Summer 2014
12 113-32-170 Samiha Sultana Self Problems of Export Oriented Woven Fabric in Bangladesh Fall 2014
13 131-32-199 Md. Gausul Islam Self Effect of Conditioning on Yarn Properties Spring 2015
14 132-32-219 Md. Nazmul Islam Self Study of waste control in blow room & carding section in cotton spinning mills Spring 2015
15 101-32-132 Farukh Ahmed Siddique Self Combine Pretreatment effect of knit fabrics of various structures Spring 2015
16 132-32-218 Md. Nahid Hasan Self Comparative Study Among Rapier, Air jet & Projectile Loom Spring 2015
17 101-32-136 Mohammad Molla Sazzad Rabbani Self Effect of processing in stenter and compacting machine on the properties of various types of knitted fabrics Spring 2015
18 132-32-221 Rafikul Islam Talukder Self Effect of knit Structures on the properties of reactive dyed cotton fabric Spring 2015
19 133-32-235 Md. Abu Raihan Self Sterilization of Medical Textile Fall 2015
20 132-32-227 Nadim Haider Maruf Self Comparative Study Among Rapier, Air-jet & Projectile Loom Fall 2015
21 132-32-222 Farzana Zarine Self Study on inspection system in various sections in a garments industry Fall 2015
22 141-32-253 Muhammad Rahat Morshed Self Factors affect on GSM of knit fabrics Fall 2015
23 133-32-240 Sandip Kumar Ghosh Self Problems and prospects of Denim in Bangladesh Fall 2015
24 133-32-236 Ashik Ahmed Maruf Self Study on different types of Denim fabric Fall 2015
25 113-32-163 Md. Mazharul Islam Self Improvement of Conventional Apparel Pattern Grading System Summer 2016
26 132-32-189 Mr. Atiqur rahman Self Study on Industrial Engineering for Apparel Production Summer 2016
27 113-32-161 DM. Ariful Islam Self Study on Complaints about Third Party Lab Tests Reports on Apparel Exports From Bangladesh Spring-2017
28 133-32-239 Mohammad Masud Parvez Self Study on Air Jet Loom with Reference on Air Consumption Spring-2017
           
           
           
           
29 151-32-273 Abdullah Al Mamun Self Quality System in RMG Factory Spring-2017
30 151-32-277 Md. Abdullah Hil Baki Self Study on Silk Fabric Production Spring-2017
31 092-23-102 Hasan Iqbal Jointly   Summer 2010
32 092-32-113 Sumon Mazumder Jointly Effects of process parameters Bio-polishing cotton fabric with on the cellulose enzyme Summer 2011
33 093-32-123 Md. Mohibul Islam Jointly Study on Jute Cotton Union Fabric properties Spring 2012
34 101-32-134 Md. Mozibur Rahman Jointly Study on the fabric defects that commonly occur during weaving Spring 2012
35 101-32-141 A.K.M. Faridul Azad Jointly Study on change of GSM of grey knit fabrics to finished fabrics Spring 2012
36 101-32-131 Md. Anamul Haque Jointly Neural replica of the spinning process to estimate the physical properties of jute cotton blender spun. Spring 2012
37 101-32-144 Ahmed Ali Jointly Study on Physical Properties of different types of yarn Spring 2012
38 101-32-146 Md. Mufazzal Hossain Jointly Effect of moisture on jute & its processing system Spring 2012
39 093-32-124 Md. Abdur Rokib Jointly Study on quality aspects in knit dyeing industry Spring 2012
40 101-32-145 Md. Abdul Based Miah Jointly Effect of spinning parameters on the physical properties of jute yarn Spring 2012
41 101-32-143 Abu Naser Mohammed Shamim Jointly An attempt to manufacture actual fine jute yarn in ring spinning system Spring 2012
42 101-32-137 Md. Abdul Kader Bepari Jointly Reduction of ETP load trough wastewater segregation Spring 2012
43 092-32-114 Md. Faizul Haque Jointly Effect of Scouring with different concentration of Na OH  on Dyeing Performance Fall 2012
44 111-32-151 Mohammad Adbus Salam Khan Jointly Study on the effect of blending parameters of spinning machine on the physical properties of bending yarn Spring 2013
45 101-32-147 Md. Aminul Islam Jointly Study of the properties of Jute and cotton blending yarn Spring 2013
46 103-32-150 Md. Mominur Rahman Jointly Studies on the strategy of boutique shop in Bangladesh Spring 2014
47 131-32-197 Mousumy Akter Jointly Study on the Properties of Cotton & Jute Cell Blended Yarn Spring-2017

1. Received Govt. financial scholarship on the basis of merit at school, College and University (College of Textile Technology, University of Dhaka, Presently BUTEX, and The University of Manchester) level.


2. Adjudged the best student of the College of Textile Technology and was awarded the best student award in 1985 (As third year student)


3. Awarded Commonwealth Scholarship (British) in 1989 to undertake postgraduate research study at UMIST, Manchester, U.K. 


4. Awarded “Osmani Memorial Award 2008” by Bangladesh Sangbadik Oikkay Parishad for contribution in the area of Textile Education of Bangladesh.

  1. Member of the registered graduates of Dhaka University.
  2. Life Member (LM-354) of the Institution of Textile Engineers & Technologists Bangladesh (ITET).
  3. Life Fellow of the Institution of Engineers, Bangladesh (IEB)- Fellowship No. F-6564.
  4. Council Member (Co-opted), Mechanical Engineering Divisional Committee 2009-2010 Sessions, IEB.
  5. Elected Council Member of IEB, Dhaka Centre for 2013-14 Session.
  6. Member of Alumni Association of the University of Manchester.
  7. Member, Editorial Committee, International Editorial Team, European Scientific Journal (ESJ)

1. Production Officer, Bangladesh Textile Mills Corporation (BTMC).
2. Executive Director, Harnest Label Industries, Tongi, Dhaka
3. Superintendent, Textile Vocational Institute, Dept. Of Textiles, Ministry of Textile, GOB.
4. Assistant Professor, BGMEA Institute of fashion & Technology (BIFT),
5. Associate Professor & Professor, Dept. Of Textile Technology, Ahsanullh -University of Science and Technology (AUST).